Kitsap Transit is seeking bids from qualified sources to provide all labor, materials, tools, equipment, transportation, supplies, permits, and incidentals required to complete all Work for the items included in the solicitation. The intent of the Contract is to prescribe a complete Work. Omissions from the Contract of details of Work that are necessary to carry out the intent of the Contract shall not relieve the Contractor from performing the omitted Work. All Work shall comply with all local, state, federal, regulations and industry standards; all of which are incorporated herein by reference as if they were written in their entirety.

Kitsap Transit is requesting qualified contractors to install insulation into the M/V Commander located in Bremerton Washington. Below item need to comply with United States Coast Guard regulations. Work will be performed on the vessel during its availability of Monday – Friday 11:00am – 1:30pm. Work must be completed by Febuary 5th, 2023. 

Work to be Completed

1. Exhaust piping on both main diesel engines between the turbo discharge and the emissions control plant have pipe attachments (3 each side) that are exposed and can cause injury. Properly insulate these protrusions on all four exhaust piping sections.
2. Main engine (turbo) bracket exceeds 150F and creates openings in the insulation exposing the turbo casing. Properly insulate bracket.
3. Generator exhaust piping where the jacketed manifold meets the dry riser flange is not properly insulated. Insulate the dry pipe flange on both generators.

Additional information and copy of the invitiation to bid can by found on Kitsap Transit's website found here
https://www.kitsaptransit.com/agency-information/procurement